ITT Part No
Global MFG Part No
Line
Series
Category
Brand
VG95234E-24-12P1N
121110-3006
CA Bayonet
CA BAYONET
Circular
Cannon
ROHS~Consult factory
REACh SVHC: consult factory
Part Data
Specifications
Bayonet | Connector with bayonet coupling |
Shell Style | Plug, 90° |
Endbell Style | Connector with spring washer and 90° endbell |
Gender | Pin |
Shell Size | 24 |
Contact Arrangement | 24-12 |
Number of contacts | 2 contacts size 160, 3 contacts size 25 |
Contact Type | AWG Crimp |
Contact Plating | Hard silver |
Shielding | no |
Specifications
Contact Rating at +20 °C (68 °F) (Size 25/12) |
41 A |
Contact Rating at +20 °C (68 °F) (Size 160/4) |
135 A |
Contact Resistance (Size 25/12) | 3 mΩ |
Contact Resistance (Size 160/4) | 0,5 mΩ |
Wire Cross Section | AWG 4 (Size 4), AWG 14/12 (Size 12) |
Operating Voltage | In case of voltages greater than 50V the connector must be used in accordance with DIN VDE part 410, IEC 60364-4-41. |
Insulator Resistance | Acc. To VG95319, part 2, test no. 5.12 and VG95210, part 32, test conditions B, standard insulator material > 1000 MΩ |
Test Voltage | 2000 Vrms |
Air and Creepage Paths (Min) | 1,1 mm |
Ambient Temperature | Standard insulator material -55°/+125°C (-67/257°F) |
Specifications
Safety Provisions | IP67 acc. to DIN 40 050 and IP68 (1 bar pressure for 16h) |
Salt Spray Resistance | 500 hours salt spray resistant |
Mating Cycles | 500 min |
Sep. Force per Contact (Size 25/12) | 1,5 N |
Sep. Force per Contact (Size 160/4) | 4,0 N |
Gauge | For infos on Gauge please see catalog VG95234, part 1 |
Coupling Torque | Closing: 14 Nm max / Opening: 0,8 Nm min |
Contact Retention (Size 25/12) | 55 N |
Contact Retention (Size 160/4) | 90 N |
Shell Material | Aluminium alloy |
Specifications
Shell Plating | Olive drab chromate over cadmium plating (conductive) |
Insulator and Grommet Material | CR-Elastomere |
Contact Material | Copper alloy |
Harnessing Info: Contact Cross-Section | See assembly instruction |
Harnessing Info: Insulator Diameter | See assembly instruction |
Wire Stripping (Size 25/12) | 6,2 mm |
Wire Stripping (Size 160/4) | 11,8 mm |
General Info | All tests in accordance with VG95319 and/or if applicable with VG95210 |
Stock Availability
Distributor Name | PartNum | Quantity | Region | Shopping Cart |
---|
Note: Data provided here are offered in good faith and are as reliable and accurate as possible. However, they do not form part of any contract of supply or purchase unless specifically confirmed in writing by an authorized representative of ITT. All information and images shown are the property of ITT ICS and are not to be reproduced in any form without direct authorization from ITT ICS. ITT ICS strongly recommends that you contact your local ITT Sales Office for confirmation of all the details you obtain through these Web pages. Please be aware that data may change at any time and without notice. For a listing of Sales Offices, local sales support, and authorized distributors please use the “Contact Us” at the top of every page.