ITT Part No
Global MFG Part No
Line
Series
Category
Brand
KPSE6E16-26P-DZ-BM221
121014-4152
26482 - Style Series I & Mil Battery
KPT / SE
Circular
Cannon
ROHS~Consult factory
REACh SVHC: consult factory
Part Data
Specifications
Shell Style | Straight plug |
Endbell Style | Grommet seal |
Gender | Pin |
Shell Size | 16 |
Contact Arrangement | 16-26 |
Number of contacts | 26 contacts size 20 |
Contact Type | Crimp Contacts |
Contact Plating | gold plated |
Contacts installed | not assembled, packed separately |
Shell Material | Aluminium alloy |
Specifications
Shell Plating | Olive drab chromate over cadmium plating |
Insulator and Gromet Material | Polychloroprene |
Contact Material | Copper alloy |
Water Tightness | Acc. To VG95319 Part 2, Test No. 5.9.2 |
Operating Temperature | -55°/+125°C (-67/257°F) |
Mating Cycles | 500 min |
Vibration | 200 m/s² at 10 to 2000 Hz |
Contact Rating AWG20 | 7,5 A |
Insulator Resistance | ≈5000 MOhm |
Test Voltage | 1500 Vrms |
Specifications
Operating Voltage | In case of voltages greater than 50V the connector must be used in accordance with DIN VDE part 410, IEC 60364-4-41. |
Safety Provisions | IP67 acc. to DIN 40 050 (0,2 bar pressure over 48 hrs) |
Salt Spray Resistance | 500 hours salt spray resistant |
General Info | All tests in accordance with VG95319 and/or if applicable with VG95210 |
Harnessing Info: Contact Cross-Section | See assembly instruction |
Harnessing Info: Insulator Diameter | See assembly instruction |
Stock Availability
Distributor Name | PartNum | Quantity | Region | Shopping Cart |
---|
Note: Data provided here are offered in good faith and are as reliable and accurate as possible. However, they do not form part of any contract of supply or purchase unless specifically confirmed in writing by an authorized representative of ITT. All information and images shown are the property of ITT ICS and are not to be reproduced in any form without direct authorization from ITT ICS. ITT ICS strongly recommends that you contact your local ITT Sales Office for confirmation of all the details you obtain through these Web pages. Please be aware that data may change at any time and without notice. For a listing of Sales Offices, local sales support, and authorized distributors please use the “Contact Us” at the top of every page.