ITT Part No
Global MFG Part No
Line
Series
Category
Brand
CA02COM-E16S-1P
121465-0004
CA Bayonet
CA COM
Circular
Cannon
ROHS~Consult factory
REACh SVHC: consult factory
Part Data
Specifications
Thread | Connector with Threaded Coupling |
Shell Style | Box mounting receptacle |
Gender | Pin |
Shell Size | 16S |
Contact Arrangement | 16S-1 |
Number of contacts | 7 contacts size 16S |
Contact Type | Solder Cup |
Contact Plating | Hard silver |
Contacts installed | yes |
Contact Rating at +20 °C (68 °F) (Size 15/15S/16/16S) |
22 A |
Specifications
Contact Resistance (Size 15/15S/16/16S) |
6 mΩ |
Operating Voltage | In case of voltages greater than 50V the connector must be used in accordance with DIN VDE part 410, IEC 60364-4-41. |
Insulator Resistance | ≥1000 MΩ |
Test Voltage | 1600 Vrms |
Air and Creepage Paths (Min) | 1,1 mm |
Ambient Temperature | Standard insulator material -55°/+125°C (-67/257°F) |
Mating Cycles | 500 min |
Sep. Force per Contact (Size 15/15S/16/16S) |
1,0 N |
Gauge | For infos on Gauge please see catalog VG95234, part 1 |
Coupling Torque | Closing: 3,5 Nm max / Opening: 0,46 Nm min |
Specifications
Contact Retention (Size 15/15S/16/16S) |
35 N |
Shell Material | Aluminium alloy |
Shell Plating | Nickel plated |
Insulator and Gromet Material | CR-Elastomere |
Contact Material | Copper alloy |
Harnessing Info: Contact Cross-Section | See assembly instruction |
Harnessing Info: Insulator Diameter | See assembly instruction |
Wire Stripping (Size 15/15S/16/16S) |
6,2 mm |
General Info | All tests in accordance with VG95319 and/or if applicable with VG95210 except salt spray resistance and heat and humidity endurance test |
Stock Availability
Distributor Name | PartNum | Quantity | Region | Shopping Cart |
---|
Note: Data provided here are offered in good faith and are as reliable and accurate as possible. However, they do not form part of any contract of supply or purchase unless specifically confirmed in writing by an authorized representative of ITT. All information and images shown are the property of ITT ICS and are not to be reproduced in any form without direct authorization from ITT ICS. ITT ICS strongly recommends that you contact your local ITT Sales Office for confirmation of all the details you obtain through these Web pages. Please be aware that data may change at any time and without notice. For a listing of Sales Offices, local sales support, and authorized distributors please use the “Contact Us” at the top of every page.