Veam HTB
Application / Market:
Series:
The HTB Series of high temperature circular connectors have been developed to meet the European Rail Agency (ERA) specific requirements (TSI - Technical Specifications for Interoperability) for safety in Railway Tunnels.
HTB connectors are based on the design of the VEAM CIR series are tested to withstand 800°C (ISO 834-1 heating curve) for nearly 30 minutes while maintaining critical control signals. This exceeds the ERA requirement of 15 minutes.
Features
- Shells: stainless steel
- Insulators: ceramic
- Grommet: silicon rubber
- Contacts: with metallic retention clip (VBN Series)
- Arrangements:
- 40A - 35 (35 poles size 12)
- Operating voltage: DC1250V, AC 900V
- Rated current 23A
Searching for part specs, 2D drawings, 3D models (when available) or available stock?
Resources
VSC Connectors Catalog
Veam VRPC Series Catalog
Veam VBN Connector Catalog
Veam Power Plate Sell Sheet
Veam HTB Series Sell Sheet
Veam FRCIRM12 Data Transmission Connector Catalog
Rail Product Selection Guide
Connecting Trains: The Promise of On-board Ethernet Networks
Veam Alstom Power Plate Case Study
Veam CIR Series Assembly Guide
Veam DSB Rail Case Study
Product Specification
Mechanical
Industry / Mil-Spec # | VG95234 |
Shape | Circular |
Shell Style | Stainless steel (AISI 303 passivated) |
Durability | Up to 500 |
Contact Style / Termination | N • 35 contacts size “12’. crimp typ |
Environmental
Operating Temperature | -55°C to 180°C |
Protection Degree In Mated Conditions | IP67 (EN60529) in mated condition with proper accessories |
Mating Cycles | Up to 500 |
Corrosion Resistance | >500 hrs salt spray |
Vibrations | 20g from 10 to 2000Hz |
Contacts Retention | Size 12 - 100 N acc. to NFF |
Electrical
Operating Voltage | 500 Vac / 1250 |
Rated Current | 23 Amps at 20°C |
Test Voltage | 2000 Vac |
Max. Contact Current | 41 Amps at 20°C |
Insulation Resistance | 5000MOhm Min. |
Material
Shells | Stainless steel (AISI 303 passivated) |
Grommet | "FLAME RETARDANT" rubber |
Contacts | Copper alloy, gold plated |
Contacts Type | N • 35 contacts size “12’. crimp type |
Applicable Cables | Stranded wire with section 2.5 sqmm / AWG12 and jacket D.O. 3.5-4.1 mm |