ITT Part No
Global MFG Part No
Line
Series
Category
Brand
FRCIR030R-32-17P-F80-VO
Z101283
Veam CIR, VBN, Other
CIR / FRCIR
Circular
VEAM
ROHS~Consult factory
REACh SVHC: consult factory
Part Data
Specifications
SERIES | Connector with Bayonet Coupling |
Shell Style | Rear Mount Receptacle - Square flange, with rear thread |
Mounting | Flange with through mounting hole |
Environmental Class | Backshell includes wire sealing grommet and compression ring |
Shell Size | 32 |
Contact Arrangement | 32-17 |
Total Number of contacts | 4 contacts |
Number of Contacts Size 4 | 4 contacts size 4 |
Gender | Pin |
Contact Type | Crimp for AWG wire (used in F80 insert) |
Specifications
Contact Plating | Silver |
Contact Material | Copper alloy |
Shell Material | Aluminium alloy |
Shell Plating | Chromate over Cadmium, olive drab, min. 500h salt spray resistance, conductive |
Insulator Material | Flame Retardant rubber |
Contacts included | no, delivery without contacts |
Protection degree in mated condition | IP67 (EN60529) with proper accessories |
Coupling | 2000 couplings minimum |
Service Rating Letter | D |
Operating Voltage DC | 1250 V |
Specifications
Operating Voltage AC | 900 V |
Dielectric strength - Minimum Flashover AC RMS |
3600 V |
Dielectric strength - Test Voltage AC RMS (Hi Pot) |
2800 V |
Note | Voltages in excess of 30 V ac or 42.5 V dc are potentially hazardous and care should be taken to ensure that such voltages can't be transmitted in any way to exposed metal parts of the connector body. |
General | Veam CIR series Connectors are produced in accordance with NATO Standard VG95234, which is based on MIL-C-5015 for physical size, layout and environment requirements. |
Stock Availability
Distributor Name | PartNum | Quantity | Region | Shopping Cart |
---|
Note: Data provided here are offered in good faith and are as reliable and accurate as possible. However, they do not form part of any contract of supply or purchase unless specifically confirmed in writing by an authorized representative of ITT. All information and images shown are the property of ITT ICS and are not to be reproduced in any form without direct authorization from ITT ICS. ITT ICS strongly recommends that you contact your local ITT Sales Office for confirmation of all the details you obtain through these Web pages. Please be aware that data may change at any time and without notice. For a listing of Sales Offices, local sales support, and authorized distributors please use the “Contact Us” at the top of every page.