ITT Part No
Global MFG Part No
Line
Series
Category
Brand
MS3106E20-18SY
-
MIL-DTL 5015 Series I
MIL-C-5015
Circular
-
ROHS~Consult factory
REACh SVHC: consult factory
Part Data
Specifications
Thread | Connector with threaded coupling |
Shell Style | Plug, straight |
Endbell Style | Endbell with clamp and bushing |
Gender | Socket |
Shell Size | 20 |
Contact Arrangement | 20-18 |
Number of contacts | 3 contacts size 12, 6 contacts size 16 |
Contact Type | Solder Cup |
Contact Plating | Hard silver |
Contacts installed | yes |
Specifications
Shielding | no |
Insulator Rotation | 250° |
Contact Rating at +20 °C (68 °F) (Size 15/15S/16/16S) |
22 A |
Contact Rating at +20 °C (68 °F) (Size 25/12) |
41 A |
Contact Resistance (Size 15/15S/16/16S) |
6 mΩ |
Contact Resistance (Size 25/12) | 3 mΩ |
Operating Voltage | In case of voltages greater than 50V the connector must be used in accordance with DIN VDE part 410, IEC 60364-4-41. |
Insulator Resistance | Acc. To VG95319, part 2, test no. 5.12 and VG95210, part 32, test conditions B, standard insulator material > 1000 MΩ |
Test Voltage | 1600 Vrms |
Air and Creepage Paths (Min) | 1,1 mm |
Specifications
Ambient Temperature | Standard insulator material -55°/+125°C (-67/257°F) |
Safety Provisions | IP65 acc. to DIN 40 050 |
Salt Spray Resistance | 500 hours salt spray resistant |
Mating Cycles | 500 min |
Sep. Force per Contact (Size 15/15S/16/16S) |
1,0 N |
Sep. Force per Contact (Size 25/12) | 1,5 N |
Gage | For infos on Gage please see catalog VG95234, part 1 |
Coupling Torque | Closing: 9 Nm max / Opening: 0,7 Nm min |
Contact Retention (Size 15/15S/16/16S) |
35 N |
Contact Retention (Size 25/12) | 55 N |
Specifications
Shell Material | Aluminium alloy |
Shell Plating | Olive drab chromate coating over cadmium plating |
Insulator and Gromet Material | Neoprene |
Contact Material | Copper alloy |
Harnessing Info: Contact Cross-Section | See assembly instruction |
Harnessing Info: Insulator Diameter | See assembly instruction |
Wire Stripping (Size 15/15S/16/16S) |
6,2 mm |
Wire Stripping (Size 25/12) | 6,2 mm |
General Info | All tests in accordance with VG95319 and/or if applicable with VG95210 |
SC_P_Code | CA |
Stock Availability
Distributor Name | PartNum | Quantity | Region | Shopping Cart |
---|---|---|---|---|
TTI Inc | MS3106E20-18SY | 99 | America |
Note: Data provided here are offered in good faith and are as reliable and accurate as possible. However, they do not form part of any contract of supply or purchase unless specifically confirmed in writing by an authorized representative of ITT. All information and images shown are the property of ITT ICS and are not to be reproduced in any form without direct authorization from ITT ICS. ITT ICS strongly recommends that you contact your local ITT Sales Office for confirmation of all the details you obtain through these Web pages. Please be aware that data may change at any time and without notice. For a listing of Sales Offices, local sales support, and authorized distributors please use the “Contact Us” at the top of every page.