NEW PRODUCT
CCS2 High Amperage EV Charging Connector - with boost mode up to 500A
Try Our New Configurator
As simple as 1, 2, 3 - Configure a Part Number, Download Technical Data, and Check Stock. Now available for APD Series I CTC Series I MKJ Series I Nemesis Series
2024 Global Events Calendar
Throughout the year, we will be attending renowned exhibitions & conferences around the world, find out where >>
ITT Part No
Global MFG Part No
Line
Series
Category
Brand
CA3102E28A16P
024256-0031
MIL-DTL 5015 Series I
MIL-C-5015
Circular
-
Not RoHS compliant~Material restriction according to RoHS Directive 2011/65/EU amended with Directive (EU) 2015/863
REACh SVHC: consult factory
CA3102E28A16P
CA3102E28A16P
Part Data
Specifications
| Thread | Connector with threaded coupling |
| Shell Style | Box mounting receptacle |
| Gender | Pin |
| Shell Size | 28 |
| Contact Arrangement | 28A16 |
| Number of contacts | 4 contacts size 4, 5 contacts size 16 |
| Contact Type | Solder Cup |
| Contact Plating | Hard silver |
| Contacts installed | yes |
| Shielding | no |
Specifications
| Contact Rating at +20 °C (68 °F) (Size 15/15S/16/16S) |
22 A |
| Contact Rating at +20 °C (68 °F) (Size 160/4) |
135 A |
| Contact Resistance (Size 15/15S/16/16S) |
6 mΩ |
| Contact Resistance (Size 160/4) | 0,5 mΩ |
| Operating Voltage | In case of voltages greater than 50V the connector must be used in accordance with DIN VDE part 410, IEC 60364-4-41. |
| Insulator Resistance | Acc. To VG95319, part 2, test no. 5.12 and VG95210, part 32, test conditions B, standard insulator material > 1000 MΩ |
| Test Voltage | 1600 Vrms |
| Air and Creepage Paths (Min) | 1,1 mm |
| Ambient Temperature | Standard insulator material -55°/+125°C (-67/257°F) |
| Safety Provisions | IP65 acc. to DIN 40 050 |
Specifications
| Salt Spray Resistance | 500 hours salt spray resistant |
| Mating Cycles | 500 min |
| Sep. Force per Contact (Size 15/15S/16/16S) |
1,0 N |
| Sep. Force per Contact (Size 160/4) | 4,0 N |
| Gage | For infos on Gage please see catalog VG95234, part 1 |
| Coupling Torque | Closing: 17 Nm max / Opening: 0,92 Nm min |
| Contact Retention (Size 15/15S/16/16S) |
35 N |
| Contact Retention (Size 160/4) | 90 N |
| Shell Material | Aluminium alloy |
| Shell Plating | Olive drab chromate coating over cadmium plating |
Specifications
| Insulator and Gromet Material | Neoprene |
| Contact Material | Copper alloy |
| Harnessing Info: Contact Cross-Section | See assembly instruction |
| Harnessing Info: Insulator Diameter | See assembly instruction |
| Wire Stripping (Size 15/15S/16/16S) |
6,2 mm |
| Wire Stripping (Size 160/4) | 11,8 mm |
| General Info | All tests in accordance with VG95319 and/or if applicable with VG95210 |
| SC_P_Code | CA |
Stock Availability
| Distributor Name | PartNum | Quantity | Region | Shopping Cart |
|---|---|---|---|---|
| TTI Inc | 024256-0031 | 54 | America |  |
| DigiKey | 024256-0031 | 73 | America | |
| Master Electronics | 024256-0031 | 160 | America | |
| Onlinecomponents.com | 024256-0031 | 160 | America | |
| TTI Inc | 024256-0031A R | 54 | America | |
| TTI Inc - Europe | 024256-0031A R | 37 | Europe | |
Note: Data provided here are offered in good faith and are as reliable and accurate as possible. However, they do not form part of any contract of supply or purchase unless specifically confirmed in writing by an authorized representative of ITT. All information and images shown are the property of ITT ICS and are not to be reproduced in any form without direct authorization from ITT ICS. ITT ICS strongly recommends that you contact your local ITT Sales Office for confirmation of all the details you obtain through these Web pages. Please be aware that data may change at any time and without notice. For a listing of Sales Offices, local sales support, and authorized distributors please use the “Contact Us” at the top of every page.