MOVE-MOD™ Series - Ultimate in modularity and flexibility by utilizing a range of snap in modules.
MIL-DTL-5015 (E&R) / CA Threaded Series
The CA Threaded / MIL-DTL-5015 (E, R &F) connectors are qualified to the MIL-C-5015 standards and have resilient insulators and wire sealing grommets for extreme environmental conditions and high altitude sealing. The contacts are bonded to the insulator as well as the insulator to the shell for environmental sealing. The MS-R has a shorter, lighter weight endbell without the cable clamp. Bothe the MS-F and MS-R have o-rings to suppliment the interfacial seal. Shells are aluminum allow and gererally plated with OD Cad or our RoHS black zinc. The MS E, R, or F series is also available with crimp contacts using a modification code of F80 after the description.
- Suitable for harsh environments (30 PSI sealing)
- Light weight Die cast aluminum hardware with integral backshell design
- Extensive offering of both Signal and Power layouts
- Available with both machined solder and crimp silver plated contacts for durability
Searching for part specs, 2D drawings, 3D models (when available) or available stock?
MIL-DTL-5015 Catalog MS A and B Configurations
MIL-DTL 5015 Connector Sell Sheet
MIL-DTL-5015 MS-K Catalog
CA Threaded Catalog
|Operation Temperature||-55°C to +125°C|
|Shell Style||Wall Mount Receptacle, Cable Connecting Receptacle, Box Mount Receptacle, Straight Plug, Pressurized Bulkhead Receptacle, 90° Angle Plug, Thru-bulkhead Receptacle|
|Durability||500 Mating Cycles|
|Power & Signal In Same Layout||Yes|
|Contact Style / Termination||Solder, Crimp, PCB|
|Operating Voltage||200-3000 VAC|
|Current Rating||up to 150A|
|Number of Signal Contacts (Min/Max)||1-90|
|Gauge Wire Size||0-20 AWG|
|Shell Plating||Cadmium (olive), RoHS Electroless Nickel, RoHS Zinc Cobalt (black), Zinc Cobalt (green), RoHS Zinc Nickel (blue, 48hr salt spray)|
|Contact||Brass or Copper Alloy|