MOVE-MOD™ Series - Ultimate in modularity and flexibility by utilizing a range of snap in modules.
IEC - ECCE Electric Vehicle Charging Plug
Designed for the European market, the ECCE Electric Vehicle Charging Plug is an IEC (Type 2) mode 3 EVSE to vehicle solution that provides low contact resistance and a minimum of 10,000 mating cycles. It is available for single and three phase charging systems and has a current rating up to 63A.
The new Gen 2+ contact system utilizes a canted coil spring design that delivers extended lifetime usage and minimizes mechanical stress, miss-alignment and power loss.
- Cable options certified and approved to regional requirements
- Sealing to meet and exceed specifications
- Coupler connector/plug strain relief provides protection from cable overstressing
- Extensive customization options (colors, harness, terminals etc)
Searching for part specs, 2D drawings, 3D models (when available) or available stock?
EVC e-mobility Solutions Brochure
EVC AC Customization Sell Sheet
EVC DC Liquid-Cooled Brochure
CCS 1 and CCS 2 Fast Charge Brochure
unu EV Scooter Case Study
ITT Zaptec Case Study
HIgh Power Charging 3M Case Study
EVC AC Charging Jumper Cables Operation Instructions
|Operating Voltage||250 VAC (single phase), 480VAC (three phase)|
|Current Rating||20A, 32A, 63A|
|Number of Signal Contacts (Min/Max)||N/A|
|Gauge Wire Size||N/A|
|Sealing||IP 44 min per IEC 61851-1 and tested in accordance with IEC 60525|
-30°C to +50°C
|Certifications Connector||CE, ETL, IEC 62196-1 and IEC 62196-2|
|Certifications Cable||DIN EN 50620|
|Durability||+ 10,000 Mating Cycles|
|Contact Style / Termination||Crimp|