MENU
Products

MDMH Hermetic Micro-D

Product Description

Our MDMH Microminiature Connectors are ideal for applications that require more robust sealing than can be achieved with epoxy resins. The MDMH uses size 24 AWG contacts that are compression glass sealed through a steel shell and into a diallyl pthalate front-end insulator. When mated, an interfacial seal provides  environmental protection. We recommend MDMH receptacles be soldered to the chassis or container for a completely leak-proof joint. MDMH receptacles mate with standard MDM plugs.

Features

  • Hermetically sealed connector designed for those applications where a vacuum, inert gas or a constant controlled pressure are required to eliminate adverse effects created by atmospheric changes
  • Steel shells provide greater strength & prevent chipping, cracking or breaking
  • Silicone elastomer compression interfacial seal to provide a moisture and humidity seal between each contact and between contacts and shell
  • Sealed with leak-proof compression glass 

Mechanical

APPLICATION / MARKET: Aerospace, Defense, Industrial, Oil & Gas
SHAPE: D Shape
SHELL STYLE: Receptacle, Solder pot
DURABILITY: 250 Mating Cycles
POWER & SIGNAL IN SAME LAYOUT: No
CONTACT STYLE / TERMINATION: Crimp, Solder, Printed Circuit

Material

SHELL: Steel
SHELL PLATING: Electroless Nickel
INSULATOR: Glass filled diallyl phthalate per MIL-M-14. Type SDG-F
CONTACT PLATING: Gold

Electrical

OPERATING VOLTAGE: 100 VDC
DIELECTRIC WITHSTANDING VOLTAGE: 300 VAC
CURRENT RATING: 5A
NUMBER OF SIGNAL CONTACTS (MIN/MAX): 9 to 100
GAUGE WIRE SIZE: 24 to 26 AWG

Environmental

SEALING: Hermetic
OPERATING TEMPERATURE: -65°C to +125°C

Related Products

  • MDM Micro-D (M83513-Style)

    Cannon's MDM Micro-D is frequently used in industrial, oil & gas, military equipment and soldier-worn applications that require small, lightweight and reliable connectors with higher density contact configurations. It is available in 8 shell sizes and accommodates anywhere from 9 to 100 contacts, along with special arrangements of power and coaxial contacts. These connectors are designed to meet the increasing demand for high performance, ruggedized and moisture-sealed microminiature connector.

    Our facility is not currently certified by the DLA and this product is not covered by the QPL/QML.



MDMH Hermetic Micro-D

Product Description

Our MDMH Microminiature Connectors are ideal for applications that require more robust sealing than can be achieved with epoxy resins. The MDMH uses size 24 AWG contacts that are compression glass sealed through a steel shell and into a diallyl pthalate front-end insulator. When mated, an interfacial seal provides  environmental protection. We recommend MDMH receptacles be soldered to the chassis or container for a completely leak-proof joint. MDMH receptacles mate with standard MDM plugs.
  • Hermetically sealed connector designed for those applications where a vacuum, inert gas or a constant controlled pressure are required to eliminate adverse effects created by atmospheric changes
  • Steel shells provide greater strength & prevent chipping, cracking or breaking
  • Silicone elastomer compression interfacial seal to provide a moisture and humidity seal between each contact and between contacts and shell
  • Sealed with leak-proof compression glass 
APPLICATION / MARKET: Aerospace, Defense, Industrial, Oil & Gas
SHAPE: D Shape
SHELL STYLE: Receptacle, Solder pot
DURABILITY: 250 Mating Cycles
POWER & SIGNAL IN SAME LAYOUT: No
CONTACT STYLE / TERMINATION: Crimp, Solder, Printed Circuit
SHELL: Steel
SHELL PLATING: Electroless Nickel
INSULATOR: Glass filled diallyl phthalate per MIL-M-14. Type SDG-F
CONTACT PLATING: Gold
OPERATING VOLTAGE: 100 VDC
DIELECTRIC WITHSTANDING VOLTAGE: 300 VAC
CURRENT RATING: 5A
NUMBER OF SIGNAL CONTACTS (MIN/MAX): 9 to 100
GAUGE WIRE SIZE: 24 to 26 AWG
SEALING: Hermetic
OPERATING TEMPERATURE: -65°C to +125°C
  • MDM Micro-D (M83513-Style)

    MDM Micro-D (M83513-Style)

    Cannon's MDM Micro-D is frequently used in industrial, oil & gas, military equipment and soldier-worn applications that require small, lightweight and reliable connectors with higher density contact configurations. It is available in 8 shell sizes and accommodates anywhere from 9 to 100 contacts, along with special arrangements of power and coaxial contacts. These connectors are designed to meet the increasing demand for high performance, ruggedized and moisture-sealed microminiature connector.

    Our facility is not currently certified by the DLA and this product is not covered by the QPL/QML.

Searching for part specs, 2D Drawings, 3D models (when available) or available stock?

Just enter a whole or partial ITT or competitor part number into any search and view the results under Part Number Matches.
Click here to search