Listing | ITT Interconnect Solutions

BKA C/D/E/F/X ARINC 600 Rack & Panel

BKA connectors represent the standard for Avionic systems developed to support the Air Transportation market. They are blind mate connectors designed per ARINC 600. These connectors are available in 3 and 6 gang configurations and can accommodate up to 800 ...

Chip-on-Flex Filter Connectors

With the increasing demand for lighter weight and more rugged filter connectors, ITT Cannon has advanced the state-of-the-art in filter technology with its Chip-on-Flex (CoF) design. This connector technology provides a significant performance improvement i...

CV 5015 Series III

High power connector series providing environmental protection with rear sealing grommets and pin interfacial seal. Fully intermateable with existing Mil-DTL 5015 and Mil-DTL 83723 series type connectors. Temperature range of -55 deg C to 200 de...

D*H/DITBH Hermetic D - Subminiature

Sealed D-Subminiature connectors, ideal for pressurized bulkhead applications, with glass sealing for maximum sealing.

D38999 Series I (KJM)

The ITT Cannon KJM is a MIL-DTL-38999 Series 1 approved circular connector for use in harsh military and aerospace environments. High density layouts with up to 128 data connections and power contacts rated up to 23A. Features proven bayonet cou...

D38999 Series II (KJ)

Weight-reduced and low profile circular connector ideally suited for avionic applications where space and weight are prime considerations. High density layouts with up to 128 data connections and power contacts rated up to 23A. Features proven b...

D38999 Series III (KJA/KJB)

The de-facto standard circular connector for use in harsh military and aerospace environments. High density layouts with up to 128 data connections and power contacts rated up to 23A. Features a triple-start coupling with anti-decoupling r...

D38999 Series III Composite KJB

A lightweight standard circular connector for use in military and aerospace environments with significant weight savings over aluminium-bodied D 38999. High density layouts with up to 128 data connections and power contacts rated up to 23A. Feat...

DPA Rack & Panel

DPA connectors are rugged, blind mate, miniature rack/panel connectors that utilize maximum insert space in a single gang shell. Polarization is accomplished with a keystone cornored shell. The operating temperature is -55C to +125C (-67F to +257F). DPA con...

DPGM-DPJM-DPJMB Rack & Panel

DPGM, DPJM, and DPJMB connectors are designed for applications where space and weight are prime considerations.Their rectangular shape provides maximum space utilization and permits easy removal of equipment for inspection and/or repair.DPGM and DPJM connec...

DPK MIL-C-83733 Rack & Panel

DPK series are high performance environment-resistant, rectangular connectors qualified to MIL-C-83733 (USAF).They feature crimp snap-in contacts in the dependable Little Caesar rear release contact retention assembly.This field-proven assembly permits cont...

DPX ARINC 404 Rack & Panel

The DPX connector comes in single, two, three and four gang versions and can accommodate up to 424 contacts.The DPX*MA connector features the LITTLE CAESAR contact assembly for rear insertion, release and extraction of crimp type contacts.DPXA shells utiliz...

DPXNE-NA MIL-C-81659 Rack & Panel

DPXNA (non-environmental, Type IV) and DPXNE (environmental, Types II and III) rack and panel connectors are designed to meet or exceed the requirements of MIL-C-81659, Revision B.DPXNA/NE connectors are available in single through four gang configurations,...

KJAQ Hi-Speed Data 38999

4 contact, matched impedance ethernet contact system for Hi-Rel sub gigabit data.

K-Lock

In the harshest shock environments, even the most reliable ratcheting coupling systems can decouple. A loss of power and control in critical applications could be catastrophic. Only the ITT Cannon K-Lock Ultra High-Vibration Locking Coupling System drastica...

MDMH Hermetic Micro - D

MDMH connectors are ideal for applications requiring a better seal than can be achieved with epoxy resins. The connector utilizes size 24 AWG contacts that are compression glass sealed through a steel shell and into a diallyl pthalate front end in...

MS A & B

The MS A&B series is a general duty circular connector manufactured to meet Mil-C-5015. It houses a plastic insulator and designed to maintain the machined solder cup contact orientation during soldering. The shell components are fabricated ...

MS E & R

The MS E, R, and F connectors are similar to the MS A&B, but have resilient insulators and wire sealing grommets for extreme environmental conditions and high altitude sealing. The contacts are bonded to the insulator as well as the insulator to t...

SGA Single Gang ARINC 600 Rack & Panel

SGA connectors are single gang connectors that utilize the ARINC 600 signal cavity inserts and contacts. They were designed to be used where there are space constraints in which a standard ARINC 600 connector can not be used. The SGA connector can accommoda...